TL;DR Panasonic Industry said on November 13, 2026 that Building A at Panasonic Industrial Devices Materials Taiwan was completely destroyed after a November 4 fire, while the condition of Buildings B and C was still being checked. The site makes multilayer circuit-board materials, so buyers with a qualified Panasonic material in an active PCB build should ask for a part-number and lot-specific status. The announcement does not quantify output loss, available inventory, recovery timing, or any effect on a JETFGO order.
What the update establishes
The November 13 Panasonic Industry notice identifies the affected company as Panasonic Industrial Devices Materials Taiwan. It reports that the November 4 fire involved an explosion, that Building A was completely destroyed, and that checks of Buildings B and C were continuing. Panasonic's Taiwan company profile describes PIDMTW as a specialist in multilayer-board materials, including IC-substrate and high-frequency materials.
This is a meaningful supplier-status change, but not proof that every Panasonic laminate grade is unavailable. The notice gives no capacity figure, product-line status, restart date, allocation policy, or list of affected grades. Do not convert it into a blanket PCB-price or lead-time claim.
What a buyer should decide now
First, identify whether the released stack-up, approved material list, or open purchase order names a PIDMTW material by exact grade, resin system, copper treatment, and revision. A brand-only check is not enough when a supplier has several sites and material families.
Second, request written confirmation from the material source or PCB fabricator for the exact build: origin site, material lot status, committed quantity, and whether any alternative has been proposed. If an alternate is proposed, hold it behind the existing change-control process. Compare electrical, thermal, mechanical, processing, and qualification implications before accepting it.
Third, separate urgent builds from forecast demand. For a build already released, freeze the approved material and ask whether the documented lot can support the planned fabrication window. For a future design, qualify a second approved material only when its data, stack-up and validation support the intended application. Neither action should be treated as a prediction of JETFGO availability, price, or delivery time.
Where JETFGO fits
JETFGO's High Speed PCB page says its engineering team reviews stack-up design, impedance targets, materials, and manufacturing feasibility before production. That public statement supports a project-specific feasibility discussion; it does not state that JETFGO uses, stocks, or can substitute any Panasonic material. Provide the released stack-up, exact material designation, electrical requirements, and required validation records for a build-specific review.
References Panasonic Industry, Notice Regarding the Fire at Our Taiwan Factory, November 13, 2026, https://www.panasonic.com/content/dam/panasonic/jp/ja/industry/info/info-20261113-ja.pdf?pid= Panasonic Taiwan, Group Companies: Panasonic Industrial Devices Materials Taiwan Co., Ltd., accessed November 16, 2026, https://www.panasonic.com/tw/corporate/profile/en/group-companies.html
Related JETFGO pages JETFGO High Speed PCB Manufacturer, https://jetfgo.online/en/products/high-speed-pcb


