← Company Updates
FROM OUR FACTORY
PCB Industry Analysis

Can a Dense BGA HDI Board Use Staggered Microvias Instead of Stacked Ones?

For a dense BGA HDI board, compare a staggered microvia escape with the proposed stacked structure before approving the fabrication drawing. The decision depends on the actual pin map, available routing space and evidence for the chosen via construction.

Published byJay ZhangInternational Business Development Manager
0views
Can a Dense BGA HDI Board Use Staggered Microvias Instead of Stacked Ones?

TL;DR If a dense BGA needs connections across more than one HDI layer, ask whether the exact pin map can be routed with staggered microvias. Where a stack is necessary, approve its material, layer connections and reliability evidence for that build before releasing the board.

Why the via arrangement matters

IPC warned in March 2019 that some microvia failures in high-performance boards appeared after bare-board inspection, including during reflow or later testing. It said thermally stressed microsections and light microscopy alone could miss weak microvia-to-target-pad interfaces. This is a standing quality risk, not a new November 2026 incident or evidence that every stacked design fails.

Würth Elektronik's September 2021 HDI training material recommends a staggered structure instead of stacking over resin-filled or other filled vias. Its illustrated alternative marks a lateral distance of at least 0.40 mm. That dimension belongs to the illustrated recommendation; it is not a universal clearance for every BGA footprint or PCB factory.

What to decide before release

First, have the designer and fabricator map the actual BGA lands, escape traces and layer-to-layer connections. Ask for a staggered option where routing space permits, and compare it with the stacked option against the same electrical, board-size and assembly constraints. A nominal BGA pitch alone does not decide which arrangement is feasible.

If stacking remains necessary, specify which microvias sit on other microvias or buried vias, the fill and cap construction, laminate and reflow exposure. Agree on a coupon and electrical test plan that can reveal latent interface weakness after representative thermal stress, with acceptance criteria set for the project. IPC's warning supports performance-based checks; it does not certify a particular supplier or prescribe a single test result for all builds.

JETFGO's English HDI PCB page says its team reviews project-specific stack-up and manufacturing feasibility. Use that review to confirm the proposed via layout and the evidence available for this design. The page does not establish that a particular stacked structure has passed the buyer's reliability requirement.

Approve the via arrangement only after the routing drawing and build-specific test evidence agree. If a staggered route cannot fit, record why the stacked route is required and what qualification will govern production changes.

References IPC, IPC Issues Electronics Industry Warning on Printed Board Microvia Reliability for High Performance Products, March 6, 2019, https://www.electronics.org/news-release/ipc-issues-electronics-industry-warning-printed-board-microvia-reliability-high Würth Elektronik, Miniaturization Using HDI: Taking Cost and Reliability Aspects into Account, September 28, 2021, https://www.we-online.com/files/pdf1/webinar-micro-hdi-miniturization-cost-reliability-cbt-en.pdf

Related JETFGO pages JETFGO, HDI PCB Manufacturer, https://jetfgo.online/en/products/hdi-pcb

Comments0
JETFGO / COMMUNITY

Join the conversation

Your comment will appear after review. Your email is never shown publicly.

Submitted for review

Received. Your comment will appear after review.

Contact Us