TL;DR Vishay announced 550 V and 600 V versions of its 259 PHM-SI snap-in aluminum electrolytic capacitors on November 17, 2026. For buyers of an 800-1100 V DC bus PCBA, the new ratings may permit a different capacitor string, but they do not by themselves approve fewer parts, a smaller board or removal of balancing components.
What changed Vishay says the expanded series includes a 330 uF, 600 V part in a 35 mm diameter by 45 mm case and a 390 uF, 600 V part in a 35 mm diameter by 55 mm case. It describes the higher-voltage parts as an alternative to designs using three 400-450 V capacitors in series. The September 16, 2026 datasheet lists a rated-capacitance tolerance of plus or minus 20 percent and shows separate two-terminal and keyed three-terminal mounting layouts. These are manufacturer specifications, not tested performance of a particular PCBA.
What the buyer should decide First, ask the power-design team to compare the existing and proposed strings at the actual maximum DC bus voltage, surge conditions, ripple-current spectrum and operating temperature. Confirm voltage sharing, required balancing and life calculations for the exact orderable parts. A 600 V nameplate cannot establish that two devices in series are sufficient for every 800-1100 V design.
Second, release a revised board and assembly drawing only after checking hole pattern, polarity, case height, mechanical restraint, electrical clearances and the through-hole process. JETFGO's English PCB Assembly page states that its service includes through-hole assembly, BOM review and project-specific engineering review; it does not claim qualification of this capacitor or this converter.
Third, check sourcing against the build date. Vishay said on November 17 that production quantities of the extended series were available, with region-dependent lead times of 12-18 weeks. That is Vishay's statement for this series at announcement, not a JETFGO stock position, quote or delivery commitment. Approve the exact manufacturer part number and current availability before changing the BOM.
References Vishay Intertechnology, 259 PHM-SI expansion announcement, November 17, 2026: https://ir.vishay.com/news-releases/news-release-details/vishay-intertechnology-extends-259-phm-si-series-snap-power Vishay BCcomponents, 259 PHM-SI datasheet, revision September 16, 2026: https://wwwlegacy.vishay.com/docs/28441/259phmsi.pdf
Related JETFGO pages JETFGO, PCB Assembly and PCBA Services, accessed November 18, 2026: https://jetfgo.online/en/products/pcb-assembly


